Software Installation Guide 

Things to keep in Mind : (Each Group Should have one Laptop with following software installed)

We shall share other needed software during the workshop.

1 Install WinAVR-20100110

Download Link :

http://sourceforge.net/projects/winavr/files/WinAVR/20100110/
winavr

 

 

 

 

 

 

 

 

 

 

Change the Destination folder to C:\WinAVR ( By Default it shows as shown in image)

This software works in backend and creates environment for AVR Studio

 2 Install AVR Studio

Download Link :

http://www.atmel.com/tools/studioarchive.aspx

Version :: AVR Studio 4.19 (build 730)

Or

AVR Studio 4.15 (build 623)

3 Install BURN O MAT

Download Link :

 

Windows Installer AVR8_Burn-O-Mat_2_1_2_setup.exe

 Settings To be Done in Burn O MAT

Go to Settings > AVRDUDE

burn1

 

 

 

 

 

 

 

 

 

Do the following changes as shown in the image

burn

 

 

 

 

 

 

In AVRDude Options

  • From the list of programmer > Select USBASP
  • From PORT > Select COM1.
  • Apply the Settings> Click on OK > Close all the Screens of Burn O Mat and Restart Again

 

4. Students with Windows 8/8.1/10 please complete these steps.

  1. If you are using Windows 8/8.1/10 then please make the changes as per the steps given below. Nothing new will happen , this will just disable the settings so that the software work properly.

Crack for Windows 8/8.1/10 >  Follow the steps one by one ( You can note down the steps before starting as laptop will restart)

 

Search  “Change Advanced Start Up” > Restart > Troubleshoot > Advanced Options > Startup Setting > Digital Driver Enforcement > Restart the system > On Start Press Key Numeric 7.

 

5 . Systems having window 8.1 may encounter o.d file missing error while compiling the program.

Download the file msys.dll file from here : https://drive.google.com/file/d/0B2X6Tot8fKuBYmpXMTRoZkZqbDA/view?usp=sharing

and paste it in C:/WinAVR/utils/bin  ( Please check the path properly)

 

6. Install device driver for USB programmer

Depending on the operating system installed on your laptop (32 but/ 64 bit) Download the exe file of the USB Programmer from here :

https://drive.google.com/folderview?id=0B2X6Tot8fKuBUXBMcUJCc2NycEk&usp=sharing

If you are using Windows 8/8.1/10 ,make sure you have completed the step 4 first.


 

For Students attending Sixth Sense Robotics Workshop

Install MATLAB 2010 or 2012 Student Version. (Avoid using Version 2014/15/16 ) You might need internet and download packages during workshop which becomes a very difficult and time consuming job.


Check Out our Summer Training and Internship Program here :

 

Summer Training and Internship Programs

Conduct a Workshop in Your college